Quick Tip - Copying and Pasting Clip Gain Envelopes from One Event to Another In PreSonus Studio One

Clip Gain was a seriously welcomed feature when Studio One Version 5 was announced. But in some cases, it can be useful to transfer the clip gain adjustments to another Event. A few circumstances where this come into play would be when dealing with Multi-Mic recordings, as well as receiving updated regions that are sitting in a Mixing session.

In this video, I demonstrate how to copy Clip Gain Envelopes (Automation Nodes) from one Event to another in PreSonus Studio One Version 5.0 and above.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

Prepping a Session For Mixing In PreSonus Studio One

In this video, I walk through the basic steps I take when prepping a Mix Session (sent from a client). Although it seems like a simple task - I find that separating this process from the creative side of mixing, helps me be more creative and focus on the mix.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

How to Store and Recall Pitchlist Presets for 3rd Party Instruments In PreSonus Studio One

One of my favorite things about working with Native Studio One instruments such as Impact XT, would have to be that all the names of the Pads (samples) show up in the Pattern Editor, and MIDI Event Editor. So it tends to be one of my top choices when working quickly with custom samples.

That being said, I also have some personal favourite’s when working with 3rd Party Library’s. So wouldn’t it be great if we could have that SAME useful information show up in these libraries?

Well, the good news is - we can. And we do so by creating Pitchlist Presets.

In this video, I demonstrate the process of creating Pitchlist Presets for 3rd Party Instruments (such as Kontakt Libraries) in PreSonus Studio One.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

How to Build a Vocal Tracking Template In PreSonus Studio One 5

I’ve been meaning to put together a new Vocal Tracking Template for the last month or so, so I thought to myself - why not roll a video, as it might be helpful to some people looking to do the same :)

In this video, I go over how to create a basic Vocal Tracking Template that can be used with the Import Song Data feature - or as a Song Template that can be loaded when creating new Songs.

How to Fix The Routing In a Studio One Song when Needing to Export Stems

Printing stems is something that comes with the territory when working in the Audio Production world. More often then not - We mix in a hurry, or as creativity strikes. This can sometimes lead to a Mix that becomes difficult to stem out, if (or when) the need arises. This is most likely because we’re building the mix as we go, and sometimes use a single Reverb for a whole track, or forget to be diligent with creating Sub Groups when mixing on the fly.

Thankfully Studio One has a robust workflow that allows us to fix these potential issues, and render out stems efficiently, and simultaneously if needed. In this video, I demonstrate how to fix the routing of a Studio One Song, with the end goal of rendering stems in mind.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

How To Toggle Optional Views In PreSonus Studio One

In this video, I demonstrate how to Toggle Optional Views in PreSonus Studio One 5. This simple but useful feature can be used to immediately clear any unnecessary windows, views, that are open in the GUI - with the added bonus of being able to bring them "back" into view just quickly.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

Auto-Expand Selected Channels In PreSonus Studio One 5

I must say that when compared to the other DAW’s that I’ve used in the past (Mainly Pro Tools & Logic Pro) Studio One has a really dynamic GUI. It allows a user to customize the amount of information being displayed quite a bit. Admittedly, when I first began using Studio One (somewhere around 2014 during Version 2) it took me a bit to get used to. But now, I love it. Especially when working with a mobile setup.

My “main” setup is with my Macbook Pro in clamshell mode, connected to all my peripherals - which is connected to a 24 inch Samsung Monitor - so I tend to have a “default” view when I work. That being said, depending on what I’m doing, and how much of the arrange window I need to see I will usually toggle back and forth between the Console being in Large view (with Sends and Inserts above the channels), and Small View. This is especially the case when Im working with a mobile setup.

This is where the “Expand” View comes in Handy. It will allow a user to see the inserts, and sends of each channel directly to the right. But in the end, a user will still have to mouse click the icon, or use a shortcut or hardware controller to actually “open” the view.

In this video, I demonstrate a new preference that was added to the Console Options in Studio One Version 5. It's a small one, but I find it to be incredibly useful in specific circumstances - such as working with limited screen real-estate on a mobile setup.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

Zooming Tips In PreSonus Studio One

In this video, I thought I would go over some simple, but useful "Zooming" Tips when working in PreSonus Studio One. Although it seems like a relatively simple topic - Studio One has a ton of different functions with respect to Zooming, that are not immediately obvious. Once you get a strong grasp on all of them, navigating your sessions is a breeze.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

My Top Macro For Lightning Fast Fades In PreSonus Studio One

In this video, I demonstrate one of my top used Editing Macro's when working in PreSonus Studio One. For anyone creating fade's and editing at light speed in Studio One - I've found this Macro to be a huge time-saver, that allows me to work almost as fast as I can move my mouse, and think of an edit.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

4 Features In PreSonus Studio One 5 That Fly Under The Radar

Major updates will always bring various new features, but sometimes hidden in between the lines, are some really useful new Key Commands, (of previous features) and feature improvements that get added that aren't showcased under the spot light…

In this video, I go over a few different features and new Key Commands that were introduced in Studio One Version 5 that come in handy.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

How To Create Key Switch Presets For 3rd Party Instruments In PreSonus Studio One 5

For anyone who works with Virtual Instruments - the concept of triggering different articulations via Key Switches will most likely be a familiar one. That being said, this hasn’t always been the easiest thing to deal with in Studio One. Case in point - Relatively simple tasks like transposing a track, an Instrument Part, or Rendering Note FX could lead to unexpected results unless the Key Switches were accounted for!

Until now that is! At the time that I’m writing this article, Version 5.0 has just been released. And along with some other various new features aimed at Composer’s and Producers, Studio One now has a really simple and easy to use Key Switch Articulation Editor built in.

I think for me, this has to be one of the top features of Version 5 with respect to “Non Audio Related” features that have been added / improved.

The good news is that the Key Switch Presets for Presence XT Instruments (that support the feature) are built right in - so we have nothing to worry about. For example, simply load up any instance of a PSO KS Preset - and everything works right out of the gate (as expected) But what about Virtual Instruments that aren’t Native to Studio One?

In this video, I demonstrate how to create, save, and embed Key Switch Presets for 3rd party virtual instruments in PreSonus Studio One 5.0 and above.

In addition, we also take a look at how to upload & download Key Switch presets using the recently updated PreSonus Exchange platform.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

Compressing Note Data with the Transform Tool In PreSonus Studio One

Certain virtual instruments will respond to different velocity’s in different ways. In some cases it’s fairly easy to adjust the velocity curve (sensitivity) so that the VI will respond to the incoming MIDI (Note Data) depending on how the user desires, but it’s also possible to alter the actual Note Data of an entire performance. In some cases, with deeply sampled instruments - this (IMHO) is preferable to tweaking the sensitivity within the VI.

In this video, I demonstrate how the Transform Tool Can be used to "compress" or alter the dynamic range of Note Data (MIDI) parameters when working in PreSonus Studio One.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

A Workflow For Committing Pipeline XT Plug-in Inserts In PreSonus Studio One

When I first started working with a DAW, I had come from working with a Multi - Tascam DA-88 setup, an Analogue Mixer, a few stereo outboard EQ’s, Compressors, and External Effects Processors. Needless to say, my first DAW Rig made full use of hardware inserts - until such time that I sold all of my external gear (except my Alesis MidiVerb 4 for nostalgic reasons).

Very shortly after this - I transitioned to mixing fully in the box, and that remained the case for quite some time. I still kept some of my external preamps, and also invested in some additional channel strips and preamps for tracking purposes but as for mixing, I was 100% in the box for years.

There were a lot of reasons that I chose to work this way - the most obvious being the ability to perfectly recall mixes, and productions without needing to dial in / recall hardware settings.

But one of the main reasons was quite simply that it was a bit of a pain, and some of the “Hardware Insert” plug-ins that shipped with the DAW’s I was using at the time, fell short in quite a few areas (IMHO). Long story short - Pipeline XT solved this problem for me, with it’s sample accurate Latency Compensation (that works even when driver’s aren’t reporting accurate latency figures), and its ability to store either text or pictures for recalling. Not to mention it’s ability to offer a Mix Knob, and some other useful features.

But regardless of all this, I still think it’s a good idea to commit, and “print” (render) any processing into the audio once things have been dialed in. That being said, I also think it’s still a good idea to be able to recall those settings without disrupting my signal chain should the situation arise where this needs to happen.

For this reason, I tend to work a certain way when working with hardware. The idea is quite simple.. I like to use hardware as the first inserts on my track, then print a new Audio File which then replaces my original at the proper level in the signal chain, so that I can continue to work, and still have the flexibility to revert if I need to.

In this video, I demonstrate a workflow that I've been using with Pipeline XT with respect to rendering (committing) my external hardware inserts - whilst still offering the flexibility of recalling (and preserving) my signal chain when needed.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

How To Quickly Deactivate Multiple Instances of Melodyne In PreSonus Studio One

When working with vocal’s I will often do a quick tune with Melodyne, Revoice Pro and/or Autotune - just so I can hear the vocals tuned in context with the track. This is usually followed by a re-do or a final pass to get them sitting just right.

Most of the time, if I’ve recorded vocals, I will also be the one tuning the final vocals, but in some cases, the raw vocal files (regions) go out to another engineer.

In these cases, it’s obviously necessary to bypass or deactivate Melodyne before exporting the raw vocal tracks.

In this video, I demonstrate a shortcut that can be used to quickly bypass (Deactivate) multiple Event FX instances of Melodyne while working in PreSonus Studio One.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

2 Ways To Automate The Pitch of Different Lanes In Drum Patterns

In this video, I demonstrate 2 different methods that can be used for automating the pitch of different elements when working with Pattern's in PreSonus Studio One. A great example of this would be automating Hi-Hat Rolls to be pitched up/down in different sections of a song.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

Exporting Multiple File Formats Using The PreSonus Audio Batch Converter

Dealing with multiple different File Formats with respect to deliverables is pretty much a given - especially if you’re dealing with Music that’s created for Television, Film, and Web. Based on my experience, different Music Production houses may request different formats, (ie: Wav or Aiff) and despite there being better options available - MP3’s are still widely used for Preview File’s.

Although this is a pretty simple task, if you’re just dealing with a basic stereo Mixdown - it can quickly become cumbersome when dealing with Multiple Mix Versions, and / or Stems of all of those multiple mixes.

For me, this task used to include 3 separate sets of exports for a lot of the work that I do when Mixing Music that’s meant to go to Music Production houses. So just imagine - sometimes I would be exporting a Stereo Mix, with up to 5 or 6 variations (edits), then Stems for each of those Mixes! Then it was basically a case of “Rinse & Repeat” for the Aiff Versions, and the MP3 Versions! Definitely NOT fun.

These days, though - I have a much quicker workflow!

In this video, I demonstrate how I typically use the Audio Batch Converter to Render multiple sets of files in different deliverable formats for jobs that require me to do so.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

How To Store and Recall Patterns In PreSonus Studio One

In a previous post, we took a look at Working With Pattern Parts In PreSonus Studio One. If you haven’t checked that out yet - you can find it here. But one thing that I mentioned was that after you’ve created some Patterns with variations - it might be nice to be able to recall them so that they can be imported into new productions.

Although it’s nice to have original sounding Drum Patterns in Songs - Simple Groove’s with a basic Kick / Snare / Hi-Hat Pattern can really help speed up the writing process when time is tight… This is where saving either Pattern FIle Preset’s or Pattern File Musicloops can come in real handy. 🙂

In this video, I demonstrate 2 different methods that can be used for storing, and recalling Pattern's in PreSonus Studio One.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

Working With Pattern Parts In PreSonus Studio One

Prior to working with Studio One, I must admit that my experience with Step Sequencer’s was pretty minimal. I understood the basic principals, and had worked with both hardware, and software tools - but never really hit the point where I adopted it into my everyday workflow for drums.

Truthfully - at one point I preferred laying in Samples on a grid, and moving them around, as needed whilst adjusting their volume to mimic different velocity layers. In fact, I would probably say that it wasn’t until I started using Studio One, that I really began to embrace MIDI based workflows for my drums.

Fast forward to Studio One Version 4 - and we got Pattern’s. The interesting thing is that I transitioned into actually preferring to use Patterns (about 90% of the time) when using Impact XT.

That being said, I always thought that there were a few missing features with the V1.0 implementation of Pattern Parts in Studio One. And for the most part, I would usually always end up converting them to Instrument Parts, for any final tweaks.. But that was taken care of in one of the more recent updates to Studio One.

In this video, I demonstrate some of the new feature's that were added to Pattern's as well as some miscellaneous workflow tips that can come in handy - with the Pattern Part's in general.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

Faderport Tips For Power Users - Studio One Native Mode

Adding a Faderport 16 to my setup, was by far one of the best decision’s I’ve ever made. Not only did it re-ignite my passion for mixing - it also opened up a new world of possibilities for how I go about mixing a track with respect to my workflow.

Now, I’m not going to lie - At first, I was a little clumsy, as I hadn’t used a control surface for mixing since my DIGI 002 Days.. But after I began to force myself to use the Faderport more and more, it eventually became second nature - and although it sounds cliche, I really wouldn’t want to mix without it..

Add my Softube Console 1 into the equation, and it’s a match made in heaven (but that’s for another day)

In this video, I demonstrate two Faderport Features, (that to the best of my knowledge, are undocumented) as well as numerous Workflow Tips for Faderport 8 & Faderport 16 Users.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus

3 Automation Tips For Working In PreSonus Studio One

Automation can really help a production come to life. That being said, there's nothing more frustrating than having an idea, and not knowing how to quickly tweak the automation to achieve your end goal. In this video, I demonstrate my top 3 tips for working with Automation in PreSonus Studio One.

And as always, if you enjoy this content, please - Share, Subscribe, and hit that like button. :)

Cheers, Marcus